For passenger cars, the DLC is usually located 12 inches away from the center of the
instrument panel, under or around the driver’s side for most vehicles. For some vehicles with
special designs, the DLC may vary. Refer to the following figure for possible DLC location.
For vehicles equipped with OBD II diagnostic socket, connect the VCI device to the
vehicle’s DLC via the included diagnostic cable.
2. Connection
(When performing
Diagnostics / Key Immobilizer
operations)
*
For no n- OB D II v ehi cle s , a n on - 16 p i n c on n ec to r( ad ap to r) i s re qu ir ed .
Refer to the User Manual for more detailed connection method.
2). The vehicle battery voltage range is 11-14Volts.
Before diagnosing, please make sure the following conditions are met:
1). The ignition is turned on.
1. Preparation
3). Locate the vehicle's DLC port.
F. Hyundai, Daewoo, Kia, Honda, Toyota, Nissan,
Mitsubishi, Renault, Opel, BMW, Mercedes-Benz,
Mazda, Volkswagen, Audi, GM, Chrysler,
Peugeot, Regal, Beijing Jeep, Citroen and most
prevailing models
D. Opel, Volkswagen, Citroen
E. Changan
A. Opel, Volkswagen, Audi
B. Honda
C. Volkswagen
If the DLC cannot be found, refer to the vehicle's service manual for the location.
1). Intelligent Diagnose
4. Diagnostics
This function allows you to use the VIN information of the currently identified vehicle
to access its data (including vehicle information, historical diagnostic records) from
the cloud server to perform quick test, eliminating guesswork and step-by-step
manual menu selection.
2). Local Diagnose
Use this function to diagnose a vehicle manually. For new users, please follow the
operation chart shown below to get familiar with and start using this tool.
3). Remote Diagnose
This function helps repair shops or mechanics to diagnose a remote vehicle, and
launch instant messages, allowing for improved efficiency and faster repairs.
Tap
Local
Diagnose
Follow the prompts on the screen
Select vehicle software
Select software version
Connection & Operations
This function allows you to perform the following functions:
2). Immobilizer Programming
This function enables you to perform the anti-theft key matching function, so that the
immobilizer control system on the car identifies and authorizes remote control keys
to normally use the car.
3. Key Immobilizer & Immobilizer Programming
1). Immobilizer
1). Read key transponder data, and generate exclusive keys.
2). Read/write on-board EEPROM chip data, and read/write MCU/ECU chip data.
