Lauda UB 20 Скачать руководство пользователя страница 46

Страница: 46 / 81

LAUDA Ultra-Thermostats
UB 20(-D), UB 25, UB 50, UB 30, UB 40
UB 20 F, UB 20 J, UB 30 J, UB 40 J, UB 65 J
UB 20 JL, UB 30 JL, UB 40 JL

YATE0013 /10.04.02

- 46 -

9.9.3 Programme

test

After the input of the programme it is advisable to check that the programme buffer

contains the correct data. This is done with the key

in the SHIFT mode.

Pressing the key repeatedly produces the same sequence as during the input of the
programme.

9.9.4

Changing the programme data

Select the data line to be changed as in "programme test", SHIFT OFF. This resets the
data of the indicated segment. Then the data can be input as usual.Enter the new data

with

each.

9.9.5

Programme start, interruption and abort

It is useful to bring the operating temperature of the thermostat to the programme start
temperature T

start

before starting the programme, or to automatize it by the tolerance

range function.

Start the programme sequence with

SHIFT mode. The programme sequence can

then be followed by the indication of the setpoint T

shows on the right the segment number, and L

shows as a setpoint source a P for

"programme" on the right.

The keys 1 to 9 are blocked while the programme is running.

The sequence of the programme can be stopped with SHIFT

and then be re-

started with SHIFT

During the interruption of the programme the display shows a W (wait) on the right in L

The programme can be aborted with

and then SHIFT

within 2 sec.

Afterwards the programme can only be started with segment 1.

Содержание UB 20


















































































Результаты поиска

Содержание UB 20

Отзывы:

Lauda UB 20, Руководство по эксплуатации, Страница: 46 / 81

Результаты поиска

Содержание UB 20

Отзывы: