Personnel:
n
Operating personnel
CAUTION!
Risk of external consumer bursting
Cold burns, impacts, cutting
A bypass controller is provided to set the pump pressure
(from MC 600).
Use a safety valve for the protection of consuming units
with a maximum permissible working pressure below the
maximum pressure of the pump. This safety valve must be
installed in the outflow of the device.
1.
To increase the pressure in the consuming unit, turn the bypass
adjusting wheel clockwise until the desired pressure (< than the per-
missible pressure) for the external consuming unit is reached.
Monitor the display on the pressure gage.
V07
Microcool
30 / 57
