Lauda MC 250, Руководство по эксплуатации

Страница: 46 / 60

8 Faults
8.1 Alarms, errors and warnings
All alarms, error messages and warnings triggered on the device appear on
the display as a 7-segment text.
Once the cause of the fault has been eliminated, the alarm can be canceled
with the Enter key.
A list of alarms can be found in
Ä
Chapter 8.2 “Overview of alarms”
on page 47.
Once the cause of the fault has been eliminated, the warning can be can-
celed with the Enter key.
A list of warnings can be found in
Ä
Chapter 8.3 “Overview of warnings”
on page 47.
If an error occurs, the device emits a two-tone acoustic signal. In addition,
the red LED on the device is lit.
If this happens, switch off the device at the mains switch. If the error occurs
again after switching on the device, make a note of the error code and
contact the LAUDA Constant Temperature Equipment Service department.
You will find the contact information in
Ä
Chapter 12.3 “Contact LAUDA”
on page 53.
Errors are symbolized with an E and a consecutive three-digit
number.
Procedure in event of alarm
Procedure in event of warning
Procedure in event of error
V07 Microcool 46 / 57