Swallow Instruction Manual
CEB00XXX-53-000
Page 7 of 12
Issue 2 30 January 2020
3.1 Filter Installation
Warning: Do not install or replace filters with the system operating. Do not operate without the
proper filters installed.
The system is designed to accommodate up to (2) stages of filtration. Filters are installed in the inlet
FastFrame holding frame.
Bag filters, up to 30” depth, are the primary filtration with the optional addition of a 2” or 4”
prefilter in front of the primary filter, if required.
Primary Filter Installation
1.
Justify the filter’s bottom edge to the back of the holding frame, allowing the filter to rest on
the compression tabs.
2.
While pressing down on the filter, compress the tabs and rock filter forward into place.
3.
Push and seat the filter against the gasket seal.
