Swallow Instruction Manual
CEB00XXX-53-000
Page 8 of 12
Issue 2 30 January 2020
Pre-filter Installation (Optional)
Only use 2” or 4” depth cardboard frame prefilters.
1.
Use the same method as previously described to install prefilter in front of primary filter.
2.
Push and seat the filter against the primary filter. (Note: minor prefilter frame deflection is
expected.)
4
Wiring
The system is completely factory wired to a junction box located on the top panel.
See system label attached to top of system beside the junction box and apply correct inlet power
(see wiring diagrams on following pages).
Follow local electrical codes for inlet power connection.
Once local power is energized the Swallow Fume Extraction System will power on.
The green “Power on” indication light will illuminate to indicate power is applied.
