Swallow Instruction Manual
CEB00XXX-53-000
Page 10 of 12
Issue 2 30 January 2020
5
Operation
Quick Start-Up
Install filters into inlet holding frames and secure all doors.
Connect inlet power and energize system. Green light will illuminate indicating “Power On”
5.1
Maintenance
Proper maintenance of the Swallow Fume Extraction System is vital for proper operation. To
maintain optimum performance, it is necessary to replace filters when they are no longer as efficient
as required or when the pressure drop becomes too high.
To determine when media change-out is required, the system is equipped with a red “Change
Filters” indicator light. Follow these guidelines to ensure your system is in optimal operation.
1.
Filters
The pressure drop across the filter exceeds the recommended change-out pressure drop or
system design pressure. The recommended “dirty” or change-out pressure drop will
illuminate the red “Change Filters” light.
Disconnect power and refer to the filter installation.
2.
System
The system should be periodically inspected, and routine maintenance checks or other
planned surveillance should be conducted. Check each system for torn gasket, broken welds,
fan belts, or any other indication that the system’s ability to contain the process airstream
has been compromised.
When placing an order for replacement filters, provide Lasermet with the serial number and
part number. This information can be found on the system label on top of the housing next
to the inlet power junction box. Refer to contact information at the back of this manual.