LaserLiner Revolution, Руководство по эксплуатации

Страница: 14 / 20

Revolution
30
Laser modes
The following modes can be controlled with the Commander 50 up to a maximum
distance of 50 m. The rotating laser can also be controlled with the SensoCommander.
Hand receiver mode
Working with the laser receiver (available as an optional
extra): set the rotary laser to maximum speed. To do this,
press the hand receiver mode button on the Commander
50 and switch the laser receiver on.
It is able to detect the laser beam at a great distance
now. Move the SensoLite up and down through the laser
beam until the middle indicator (38) appears. Mark the
measured height at the perimeter marking groove.
SpotLite Marking: The projected light beam at the height
of the laser beam simplifies precise marking and prevents
parallax error.
Universal mount (optional):
The laser receiver can be installed on levelling staffs with
the aid of the universal mount. The Flexi measuring staff
(Art. No. 080.50) is always recommended when measu-
ring from floor heights. It also allows you to determine
heights directly without any need for calculation.
Manual slope function
Manual re-adjustment:
Steeper slopes can be set using the angle plate,
which is available as an optional extra (product ref.
080.75). To this end you need to use a crank tripod,
such as the 300 cm professional crank tripod, pro-
duct ref. 080.34.
TIP: Allow the device to align itself automatically
and set the angle plate to the zero position. Then
press the slope/man button three times to switch the
automatic sensor off. Finally, incline the device to the
angle you require.
3x
(13)
ENGLISH