LaserLiner Revolution, Руководство по эксплуатации

Страница: 4 / 20

Revolution
20 ENGLISH
Brief instructions
Initial switch-on Use the ON/OFF button to switch the device on. The
automatic sensor now levels the device horizontally and/
or vertically; the laser remains stationary and flashes
during this set-up phase. As soon as levelling is comple-
te, the laser starts to rotate at 750 rpm.
Hand receiver
mode For working with the laser receiver (available as an
optional extra).
Rotary mode The following speeds can be set using the rotary button:
750, 350, 0 rpm
Spot mode You access spot mode by pressing the rotary button
repeatedly until the laser stops rotating. The laser can
then be positioned exactly at the measuring point by
means of the direction buttons.
Scan mode The scan button can be used to activate and set a light-
intensive segment in 4 different widths. You position the
segment via the direction buttons.
ADS tilt
function This function protects the rotary laser from changes
in position caused by the device being disturbed by
external factors, thus preventing erroneous or inaccu-
rate measurements. Press the tilt button as soon as the
rotary laser has been aligned and the automatic sensor
is up and running. The tilt function becomes active after
around 30 seconds and the tilt LED starts to flash every
second. If the device then moves, it will switch itself off.
The laser and the tilt LED start to flash rapidly.
Anti-shake
function The device can be set up really quickly with this func-
tion, which enables the laser to be set to a required
height, for example. It also means that the laser can
be used on vibrating surfaces and in windy conditions,
possibly in conjunction with the single slope function.
The laser will continue to rotate whilst the automatic
sensor is setting up the device. IMPORTANT: Precision is
adversely affected during the set-up phase.