LaserLiner Revolution, Руководство по эксплуатации

Страница: 13 / 20

3x
1x
(13)
(13)
(22)
3x
1x
(13)
(13)
(22)
(22)
± 4°
± 4°
(22)
Revolution
29
Manual slope function
This function deactivates the automatic sensor, which enables two axes to be re-adjusted
simultaneously and steep slopes to be set. To use the function, press the slope/man but-
ton repeatedly until the man LED lights up. Use the tilt button to toggle between the X
and Y axes. The plus/minus buttons are used to re-adjust the slope by means of a motor.
In vertical operation, press the slope/man button 3 times to activate the manual slope
function for the Z axis. IMPORTANT: Since the automatic sensor is not active, horizontal
and/or vertical levelling cannot take place.
Horizontal motorised re-adjustment:
Vertical motorised re-adjustment:
ENGLISH