LaserLine LC800, Инструкция по монтажу

Страница: 65 / 68

65
The unit doesn’t
activate or power-on
Check that when powering the
product, the LEDs on the
control unit turn on and emit a
beep from the siren if
connected.
Check the power
supply fuse and the
ground point
The unit is powered
but the system does
not activate .
Check the LIN / CAN
connections or analog signals
connections.
Check vehicle code
enter (by button or PC)
The unit is powered
but the system does
not activate .
Only for the versions with
electronic emergency key,
check that inserting the key
twice, thesytem is inserted
If the system does not
activate even with the
electronic key, check
the connection of the
under key wire (purple)
The vehicle does not
turn on after checking
that the status LED is
of f
Wrong / missing key
connection (purple) or faulty
unit
Check the connections
or replace the unit
Vehicle does not turn
on, status LED
fast
fl
ashing
Transponder not
recognized by the unit
Check that the transponder is
available and switched on
Press the button on the
transponder and check
the LED
fl
ashes