LaserLine LC800, Инструкция по монтажу

Страница: 44 / 68

44
 One or all output can be set for provide a ground signal intermittent in alarm phase for
commanded via rel
the horn of the vehicle. ay

One or all output can be set for provide a ground signal for ‘’X’’ seconds in presence of one
code dedicated on data line of the vehicle .
ELECTRICAL CONNECTIONS
CODIFICATED SIREN OUTPUT (Empty position n.23) ou put programmable. See the t
programmable function via PC
 Def ult setting; The output is set for send a series of data of self-powered siren Laserline, a
(The line transmits acoustic arming and disarming signals, recharging the internal battery,
ect...)
Other programmable function:
 The output is set to provide a timed ground signal when the product is in the alarm phase
(sound cycle).

The output can drive a external buzzer for function like anti-theft (buzzer 12 volt) special
OUTPUT
• YELLOW/BLACK WIRE:
output programmable via PC
1) Default setting; The output is set to provide an impulsive ground signal in the alarm phase to
activate the emergency button, ‘’hazard’’.
• WHITE WIRE : output programmable via PC
1) Default setting; The output is set to provide a constant signal of ground when the product is
armed. This signal is used for the abilitation a window regulator module or a satellite alarm, the
output can be temporized for windows closing in comfort mode.
• BLUE/BROWN WIRE: programmable output via PC.
1) Default setting; The output is set for provide a temporized signal of ground when the product
is in alarm phase. This signal is used for a traditional siren with negative command or for
indicate a alarm to one satellite device.
Other programmable settings for exit pins 19, 20, 21, 22

One or all outputs can be set for provide a ground signal impulsiv in alarm phase for activate e
the hazard button .

One or all outputs can be set for provide a temporized negative signal when the product is in
alarm phase.

One or all outputs can be set for provide a ground constant signal till when the vehicle is
closed (product armed)

One or all of the outputs can be set to provide a ground signal for a set time of 10, 25 or 45
seconds after the vehicle has been closed (comfort glass closing).
 One or all of the outputs can be set to provide a ground signal when the handbrake of the
vehicle is activate . If the device read the presence of brake data on the can bus network; the
system will provide the signal on this wire in the presence of the active handbrake.
 One or all the outputs can drive an external buzzer for particular functions such as anti-
robbery function. (buzzer 12 volt)