43
ELETRICAL CONNECTIONS
INPUT
• LIGHT BLUE WIRE, WHITE/BLUE WIRE, GREY WIRE (7 empty position):
Programmabile input, Programmable input via PC
Default settings ; the wires are set to perform peripheral protection (doors, trunk and bonnet)
its possible also inverting the polarity of LIGHT BLUE wire for read a signal coming from the
positive command car.
‘
’ mode: when the protected compartments (door) are opened, a negative signal is
Negative
given to the alarm control unit.
‘
mode: when the protected compartments (door) are opened, a negative signal is
Positive’
missing or becomes positive.
Use the
wire for the contacts of all the doors while the
and
wire
BLUE
GRAY
WHITE-BLUE
for the bonnet button.
INHIBIT: one or all of the inputs may have the possibility of ignoring the command of the
product of disarm came from CAN-BUS network or from analogic signals (green/blue,
yellow/blue white/orange wires) in presence of the ground on one of these inputs the control
unit remains blocked (inhibit) for a selectable time (0.8,1,1.5,15)
I alarm trigger: one or all of the inputs block the command of the product of disarm
with alarm trigger, (see INHIBIT description)
U.S. exclusion by the wire: one or all inputs can to exclude the function of inside ultrasound of
the control unit (Infrared sensor too for a product with radio receiver)
BI VOLUMETRIC: One or all input can be work as bi volumetric sensor in the combination of
ultrasound sensor inside of the product. The ultrasound sensor will provide an alarm
condition only if within a minute will have a condition of alarm on one of the wire set as bi
volumetric. (Function for cabriolet car in combination at hyper-frequency)
INPUT exclusion when US exclusion: One or all inputs can ignore the alarm condition if the
internal ultrasound sensors exclusion procedure is carried out by the customer.
OUTPUTS
BLOCK ENGINE RELAY
• GREEN/YELLOW WIRE, GREEN/BLACK WIRE , GREEN WIRE:
Function programmable
via Personal Computer
The internal relay of engine block can support a contin ous current of 8 Amper and can be used
u
for different functions programmable
Def ult settings ,engine block at rest. Interrupt the wire of engine block of the ve icle and
a
h
connect to the two ends the Green/Black wire and the Green wire of the control unit. (isolate
the remaining wire Green/Yellow).The relay will make the interruption in presence of the
ignition key.
Engine block attracted (Disarmed). Interrupt the wire of engine block of the ve icle and
h
connect to the two ends the Green/Yellow wire and the Green wire of the control unit. (isolate
the remaining wire Green/Black). The relay will make the interruption always with the ve icle
h
in off, only in diasrmed alarm with sta ting the car the engine block will be excluding. (purple
r
wire ignition key obligatory) for version with transponder in presence the relay is actived by
the code of tra sponder.
n
Other programmable settings:
Intermittent command in alarm (clacson): By setting the Green wire and Green/yellow its
possible get a intermittent positive or negative of power command to pilot a horn or a power
siren.
Содержание LC800
Страница 32: ...NOTE 32...
Страница 66: ...66...
