LARTET DN-107P, Руководство по эксплуатации

Страница: 17 / 33

CHAPTER 4 OPERATION 4-5
DN-107P displays series
4.2.5.1. Parameter 2. Co
This is a 2 digit parameter. The function of each digit is indicated in the following table.
Left digit Operating modes
Right
digit
Automatic function
0 Increase Hours/Minutes 0 Not activated
1 Decrease Hours/Minutes 1 Time = Alarm 1
→ Reset
2 Inc/Dec Hours/Minutes
→
Input 5
2 Time = Alarm 2
→ Reset
3 Increase Minutes/Seconds 3 Time = Alarm 1
→ Preset 1
4 Decrease Minutes/Seconds 4 Time = Alarm 2
→ Preset 1
5 Inc/Dec Minutes/Seconds
→ Input 5
5 Time = Alarm 1
→ Preset 2
6 Time = Alarm 2
→ Preset 2
7 Time = Alarm 1
→ Stop
8 Time = Alarm 2
→ Stop
In types of working 2 and 5 (Inc./Dec. Hours/Min.
→ input 5 and Inc./Dec. Min./Sec. →
input 5) the time is increased or decreased depending on the state of input5.
With the input 5 activated, the time increases. With the input 5 deactivated, the time
decreases.
The automatic function (right digit) permits modifying the stopwatch.
0
Chronometer value not modified.
1 Resets the chronometer if it is equal to alarm 1
2 Resets the chronometer if it is equal to alarm 2
3 Loads preset 1 if it is equal to alarm 1
4 Loads preset 1 if it is equal to alarm 2
5 Loads preset 2 if it is equal to alarm 1
6 Loads preset 2 if it is equal to alarm 2
7 Stops the chronometer if it is equal to alarm 1
8 Stops the chronometer if it is equal to alarm 2
4.2.5.2.
Parameter 3. P1: Preset 1 value
The maximum value is 23h:59m or 59m:59s.
4.2.5.3. Parameter 4. P2: Preset 2 value
The maximum value is 23h:59m or 59m:59s.
4.2.5.4. Parameter 5. A1: Alarm 1 value
The maximum value is 23h:59m or 59m:59s.
4.2.5.5. Parameter 6. A2: Alarm 2 value
The maximum value is 23h:59m or 59m:59s.
4.2.5.6. Parameter 7. S1: Activation and temporization conditions of output 1.
See 4.4.2
“Using functions counter or chronometer”