WALL-MOUNT BRACKET INSTALLATION
To expand your choice of convenient locations for the Base Station, wall-mount bracket kit is available as an optional accessory.
The wall-mount bracket kit comprises three accessories, one wall-mount bracket, four mounting screws for wall-mount bracket and
two loop screws for Base Station as shown in the Figure 5-1. You may need other tools to drill holes for the mounting screws on the
wall and mount the bracket properly. Consider choosing the proper tools such as eye protection for drilling, electric drill, screwdriver
and etc in accordance with the location and environment you have chosen.
Step 1.
Unpack the wall-mount bracket kit and ensure all the four items are enclosed. Using the proper supplied accessories is
critical to a safe and solid installation and durability.
Step 2
. Decide the location where to mount the bracket.
WARNIG!
Do not use the wall-mount bracket other than the purpose that it is intended.
Do not expose or mount the bracket above or near an appliance that produces heat.
Do not mount on surface that have hazards concealed behind them such as electrical wiring, conduits or plumbing.
Mount the bracket on vertical or horizontal surface only and all other safety cautions are required to follow.
Step 3.
Put the wall-mount bracket on the wall as shown in the Figure 5-2 to mark the location of the holes. The bracket surface
with four
(A)
holes should be direct attached to the wall and two
(B
)
holes should be shown on the upper side of the
bracket. Mark four drill holes for mounting screws on the wall with a pencil.
Step 4.
Drill the four holes and insert four plastic anchor bolts each into the holes.
A. Holes to drill mounting screws
B. Holes to hang the Base Station
B
A
B
A
A
A
Wall-mount bracket
Loop screws for Base Station (2ea)
Figure 5-1. Wall-mount bracket kit
Plastic anchor bolts (4ea)
Mounting screws for wall bracket (4ea)
Figure 5-2. Wall-mount bracket on a wall
57
