PAIRING UP BELT PACKS
Check out the
power status of the Base Station and each Belt Pack‟s, which will be paired up with. To execute a paring
process, the Base Station and Belt Packs should be on. Belt Packs should not go further than 3 feet (1 meters) of the Base
Station while they are being paired.
NOTE
: Once paring is completed, the Base Station and each Belt Pack should go further than 6.5 feet (2 meters) to operate
otherwise, there could be audio breakups.
In
NORMAL
menu(#15)
on the Base Station‟s front panel display, press SET(#12), then the MAIN menu appears, as
shown in Figure 3-5. Under MAIN menu, scroll(#8, #9, #10, #11) to and select
„BELTPACK‟ and press SET(#12) then the
BELTPACK menu appears, as shown in Figure 3-6.
SETTING THE MAXIMUM NUMBER OF BELT PACKS (BPK#)
Enter the maximum number of Belt Packs that you want to pair up with the Base Station. Under the BELTPACK menu,
press SET(#12) on
“BPK#” then input the maximum number by pressing UP, DOWN (#8, #9) buttons and press SET(#12)
to save. If the number of
BPK# is exceeded 32, the message “Shared” appears. Move to next item „LABEL/GROUP/PAIR‟
and press SET(#12).
Figure 3-6. BELTPACK menu
Figure 3-4. Front Panel of the Base Station
15
12
13
14
10
1
3
2
4
5
6
8
7
9
11
Figure 3-5. MAIN menu
20
