Step 3:
The headset is with „Push-Pull Lock‟ type connector. Put a headset into the HEADSET connector (#13) on the front panel of
the Base Station. To disconnect the headset, hold the plug on the headset connector and pull out.
Step 4:
Press the POWER switch (#4) on the rear panel of the Base Station to turn on the Base Station.
„DFS detecting‟ will be
indicated on the Base Station
‟s front panel display and once the detecting is completed, NORMAL menu will pop up as
shown in Figure 3-3: The green light on top of the TALK button (#1) should be flashing slowly indicating the readiness of
Base Station to start operations.
See the “
BS250 BASE STATION OPERATION
”
in SECTION 4
for details about the NORMAL menu.
Figure 3-3. NORMAL menu
18
