Appendix A: Command Reference
xPico® Wi-Fi® Embedded Device Server User Guide
87
configitem WLAN Profile delete
value name
name
may contain up to 35 characters.
configgroup Modem Emulation
Connections can be initiated and accepted using
Modem
"AT" commands incoming from the Serial Line.
configitem Listen Port
value
Specify a
Listen Port
to accept connections on.
Blank the value for "<None>".
configitem Echo Pluses
value
With
Echo Pluses
enabled, pluses will be echoed back during a "pause +++ pause" escape sequence on the
Serial Line.
Echo Pluses
may be "Enabled" or "Disabled".
configitem Echo Commands
value
With
Echo Commands
enabled (ATE1), characters read on the Serial Line will be echoed while the Line
is in Modem Command Mode.
Echo Commands
may be "Enabled" or "Disabled".
configitem Verbose Response
value
With
Verbose Reponse
enabled (ATQ0), Modem Response Codes are sent out on the Serial Line.
Verbose Response
may be "Enabled" or "Disabled".
configitem Response Type
value
Response Type
selects either Text (ATV1) or Numeric (ATV0) representation for the Modem Response
Codes sent out on the Serial Line.
Response Type
may be "Text" or "Numeric".
configitem Error Unknown Commands
value
With
Error Unknown Commands
enabled (ATU0), ERROR is returned on the Serial Line for
unrecognized AT commands. Otherwise (ATU1) OK is returned for unrecognized AT commands.
Error Unknown Commands
may be "Enabled" or "Disabled".
