Appendix A: Command Reference
xPico® Wi-Fi® Embedded Device Server User Guide
89
\10 (decimal)
End Character
may contain one character, where <control>J, for example, counts as one.
value Length
Sets the
Length
of response.
Response is ended by any configured
End Character
,
Length
OR
Timeout
.
Length
has units of bytes.
value Timeout
Sets the
Timeout
to receive response. Minimum timeout is 100 milliseconds.
Response is ended by any configured
End Character
,
Length
OR
Timeout
.
Timeout
has units of milliseconds.
Blank the value for "<Minimum>".
configgroup Monitor Control
These settings pertain to
Monitor Control
in the device.
Control Message will be processed after receiving status action
Send
. Response will overwrite any
response captured during initialization or poll. Response must be read before sending another status action
Send
or buffer will be reset.
configitem Message
value Command
Sets the
Command
in binary format.
Binary format takes printable characters (e.g. 'abc' for characters 'a', 'b' and 'c') or binary string (e.g. [0xa,
0xd] for line feed and carriage return).
Command
may contain up to 16 bytes.
value End Character
Sets the
End Character
to indicate end of response.
Response is ended by any configured
End Character
,
Length
OR
Timeout
.
The
End Character
may be designated as a single printable character or as a control character.
Control characters may be input in any of the following forms:
<control>J
0xA (hexadecimal)
\10 (decimal)
End Character
may contain one character, where <control>J, for example, counts as one.
value Length
Sets the
Length
of response.
Response is ended by any configured
End Character
,
Length
OR
Timeout
.
Length
has units of bytes.
