Appendix A: Command Reference
xPico® Wi-Fi® Embedded Device Server User Guide
80
configitem IP Address
value
IP Address
may be entered alone, in CIDR form, or with an explicit mask:
192.168.1.1 (default mask)
192.168.1.1/24 (CIDR)
192.168.1.1 255.255.255.0 (explicit mask)
The IP Address will be displayed always in CIDR, the canonical form.
IP Address
may contain up to 31 characters.
configitem Default Gateway
value
The
Default Gateway
is used only if DHCP Client is disabled, and provides the IP Address of the router.
This setting is not applicable to the Access Point.
Default Gateway
may contain up to 15 characters.
configitem Hostname
value
Hostname
must begin with a letter or number, continue with letter, number, or hyphen, and must end with
a letter or number.
If
DHCP Client
is enabled, the Hostname is sent to the remote DHCP Server and may figure into the
address assignment.
This setting is not applicable to the Access Point.
Hostname
may contain up to 63 characters.
configitem Primary DNS
value
The
Primary DNS
is the first choice when performing a Domain Name lookup.
This setting is not applicable to the Access Point.
Primary DNS
may contain up to 15 characters.
configitem Secondary DNS
value
The
Secondary DNS
is the second choice when performing a Domain Name lookup.
This setting is not applicable to the Access Point.
Secondary DNS
may contain up to 15 characters.
configgroup Line
These settings pertain to the Serial
Line
. Changes take effect immediately.
