Lantronix SLC 8000 Series Скачать руководство пользователя страница 226

Страница: 226 / 425

9: Device Ports

SLC™ 8000 Advanced Console Manager User Guide

226

The site list will be searched for a site that (a) the

Login/CHAP Host

matches the name that

was authenticated, (b)

Authentication

is set to PAP, and (c) the

Port

is set to

None

matches the port the modem is on.

If a matching site is found, the

Timeout Logins

parameter configured for the site will be used

for the rest of the dial-in connection instead of the

Timeout Logins

parameter configured for

the modem. Once authenticated, a CLI session will be initiated, and the user will remain

connected to the SLC 8000 advanced console manager until they either logout of the CLI

session, or (if

Timeout Logins

is enabled) the CLI session is terminated if it has been idle.



For PPP connections, the user will be authenticated via PAP or CHAP (determined by the

Authentication

setting for the modem). For PAP, the Local/Remote User list will be used to

authenticate the login and password sent by the PPP peer, and the site list will be searched for

a site that (a) the

Login/CHAP Host

matches the name that was authenticated, (b)

Authentication

is set to PAP, and (c) the

Port

is set to

None

or matches the port the modem

is on. For CHAP, the site list will be searched for a site that (a) the

Login/CHAP Host

and

CHAP Secret

match the name and secret sent in the CHAP Challenge response by the PPP

peer, (b)

Authentication

is set to CHAP, and (c) the

Port

is set to

None

or matches the port

the modem is on. If the remote peer requests PAP or CHAP authentication from the SLC unit,

the

Remote/Dial-out Login

and

Remote/Dial-out Password

configured for the modem (not

the site) will be provided as authentication tokens.

If a matching site is found, its

Negotiate IP Address

NAT

, and

Modem Timeout

parameters

will be used for the rest of the dial-in connection instead of the parameters configured for the

modem. Once authenticated, a PPP session will be established using either negotiated IP

addresses or specific IP addresses (determined by the

Negotiate IP Address

setting). The

PPP connection will stay active until no IP traffic is sent for

Modem Timeout

seconds.

Dial-back

The SLC advanced console manager waits for a peer to call the SLC unit, establishes a text

(command line) or PPP connection, authenticates the user, and if the SLC 8000 advanced console

manager is able to determine a dial-back number to use, hangs up and calls the dial-back number

to establish either a text or PPP connection.



For text connections, the user will be prompted for a login and password, and will be

authenticated via the currently enabled authentication methods (Local Users, NIS, LDAP, etc).

The site list will be searched for a site that (a) the

Login/CHAP Host

matches the name that

was authenticated, (b)

Authentication

is set to PAP, and (c) the

Port

is set to

None

matches the port the modem is on.

If a matching site is found, its

Timeout Logins

Dial-back Number

Allow Dial-back

, and

Dial-back Delay

parameters will be used for the rest of the dial-back connection instead of the

parameters configured for the modem. Once the remote server is authenticated, if

Allow Dial-

back

is enabled for the site and a

Dial-back Number

is defined, the SLC unit will hang up and

wait

Dial-back Delay

seconds before initiating the dial-back. The SLC 8000 advanced

console manager will dial, prompt the user again for a login and password, and a CLI session

will be initiated. The user will remain connected to the SLC unit until they either logout of the

CLI session, or (if

Timeout Logins

is enabled) the CLI session is terminated if it has been

idle.



For PPP connections, the user will be authenticated via PAP or CHAP (determined by the

Authentication

setting for the modem). For PAP, the Local/Remote User list will be used to

authenticate the login and password sent by the PPP peer, and the site list will be searched for

a site that (a) the

Login/CHAP Host

matches the name that was authenticated, (b)

Authentication

is set to PAP, and (c) the

Port

is set to

None

or matches the port the modem

is on. For CHAP, the site list will be searched for a site that (a) the

Login/CHAP Host

and

CHAP Secret

match the name and secret sent in the CHAP Challenge response by the PPP

Содержание SLC 8000 Series










































































































































































































































































































































































































































Результаты поиска

Содержание SLC 8000 Series

Отзывы:

Бренды по названию

Популярные бренды

Lantronix SLC 8000 Series, Руководство пользователя

Результаты поиска

Содержание SLC 8000 Series

Отзывы:

Бренды по названию

Популярные бренды