Lantronix SLC 8000 Series Скачать руководство пользователя страница 106

Страница: 106 / 425

6: Basic Parameters

SLC™ 8000 Advanced Console Manager User Guide

106

To manage or view status for a Performance Monitoring probe:

1. Click the

Network

tab and select the

Perf Monitoring

option. The following page displays.

Figure 6-10 Network > Perf Monitoring

2. In the upper section of the page, modify the global Performance Monitoring settings:

Number of operations

kept for each probe

Specifies the number of operation set files to keep for each probe. The limit for

Local storage is 50 sets. The limit for external (USB or SD card) is 200 sets. While

a probe is running, the operation set files will be automatically culled to remove

the oldest operation set files.

Repository for

operations

The repository where the operation set files will be kept -

Local

storage, a USB

thumb drive inserted in the upper

USB Port U1

or lower

USB Port U2

, or the

card

slot. The data is stored in individual directories under a directory called

"perfmon". Once probes have been run and operation set files have been

generated, changing the repository will cause all of the existing files to be moved

from the old repository directory to the new repository directory. It is

recommended that the repository only be changed when probes are not actively

running. If external storage is used for the repository, it is recommended that the

external storage device not be removed from the SLC while probes are actively

running.

UDP Jitter Responder

Starts the UDP Jitter responder to reply to UDP jitter or UDP jitter VoIP packets.

The responder will listen on UDP port 1967 for control messages requesting to

start individual responders on a specific UDP port. The SLC UDP jitter responder

can support up to 15 UDP jitter senders.

UDP Echo Responder

Starts the UDP Echo responder on the port configured in

UDP Port

to reply to

UDP echo packets. The SLC UDP Echo responder supports one UDP echo

sender.
When the UDP Echo responder is enabled, the SLC will verify that the responder

UDP port is not being used by any other SLC processes, including port 1967

which is reserved for the UDP Jitter responder.

Содержание SLC 8000 Series










































































































































































































































































































































































































































Результаты поиска

Содержание SLC 8000 Series

Отзывы:

Бренды по названию

Популярные бренды

Lantronix SLC 8000 Series, Руководство пользователя

Результаты поиска

Содержание SLC 8000 Series

Отзывы:

Бренды по названию

Популярные бренды