Lantronix SLC 8000 Series Скачать руководство пользователя страница 105

Страница: 105 / 425

6: Basic Parameters

SLC™ 8000 Advanced Console Manager User Guide

105

Performance Monitoring

The SLC supports Performance Monitoring probes for analyzing network performance. Probes for

DNS Lookup, HTTP Get, ICMP Echo, TCP Connect, UDP Jitter and UDP Jitter VoIP are

supported. Up to 15 different probes can be configured. Each probe will run a series of operations,

each of which sends a series of packets to a destination host. The SLC will measure how long it

took to receive a response, and record the results. For each operation, the user can view the

results for each packet (round trip times), or the accumulated statistics for all packets - minimum,

average and maximum latency, and for jitter probes, minimum, average, maximum and standard

deviation of the jitter delay. Dropped packets and other error conditions are recorded for each

operation. This capability allows an administrator to analyze network efficiency across the

network.
An operation consists of sending a specified number of packets to a destination host and optional

port, with a specified amount of time between each packet. All results for each operation are

stored in one data file, and the results can be viewed later. Accumulated statistics can also be

pulled from the SLC via SNMP Gets.

Repository and Operations Kept:

The SLC can be configured to store probe results on the local

SLC storage, or an external USB thumb drive or SD card. The number of operations that can be

stored per probe on the local SLC storage is 50 operations; for external USB thumb drive or SD,

200 operations can be stored per probe.

Responders:

The SLC can act as a responder for probes that require a responder to answer

packets that are sent from the SLC (UDP jitter, UDP jitter VoIP, UDP Echo and TCP Connect). The

SLC UDP jitter responder can support packet responses for up to 15 UDP jitter or UDP jitter VoIP

probes. The UDP Echo and TCP Connect can support packets responses for one UDP Echo or

TCP Connect probe.

Jitter Probes and Clock Skew:

For jitter probes, it is important to have both the sender and

responder synchronized to a reliable NTP server. Significant clock skew can greatly affect jitter

results, as timestamps are recorded in the sender probe and the responder, and these timestamps

are used to measure one-way latency for the packets. At the start of each jitter operation, the clock

skew between the sender and the responder will be output to the system log.

Compatibility with Cisco Responders:

The SLC Performance Monitor sender is compatible with

Cisco IP SLA responders (IOS versions 12.2 and 15.0) for jitter probes. The SLC uses a simplified

version of the IP SLA v2 (Engine II) protocol to communicate with the Cisco IP SLA responders.

This compatibility gives the administrator a large number of devices with which to measure

network performance.

High Resolution Timers:

Performance Monitoring requires that high resolution timers be enabled

in order to generate accurate results down to the microsecond. The high resolution timers are

disabled by default, and can be enabled on the

Maintenance > Firmware & Configurations

web

page. A reboot is required if the setting is changed. Enabling high resolution timers may affect SLC

performance.

Содержание SLC 8000 Series










































































































































































































































































































































































































































Результаты поиска

Содержание SLC 8000 Series

Отзывы:

Бренды по названию

Популярные бренды

Lantronix SLC 8000 Series, Руководство пользователя

Результаты поиска

Содержание SLC 8000 Series

Отзывы:

Бренды по названию

Популярные бренды