Landoll Brillion SS4, Руководство оператора

Страница: 18 / 56

2-4 7K555-2401
ASSEMBLY
TABLE OF CONTENTS
Figure 2-4: Quick Attach Plate Mounted - Offset
Agitator Installation
CAUTION
WARNING
IMPORTANT
Never force to add a Square Bore Washer since it will
cause binding. Agitators must be free to rotate.
Blade Agitators are standard. Blade Agitators must be
installed with careful attention to the direction of the Shaft
Rotation.
See Figure 2-5. When the Blade Agitators
operate, there should be a slight clearance between the
Agitators and the bottom of the Seed Box.
Optional 5-Strip Brush, Cage and 8-Row Brush Agitators
are available for specific varieties. Contact the Brillion
office for rates and compatibility with unlisted seed
varieties.
5-Strip Brush Agitators must be installed with the brushes
facing backward, away from rotation to wipe over the seed
openings.
See Figure 2-6. Brush Agitators sweep the
bottom of the Seed Box to control the flow of the seed.
Chain breakage and excess brush wear may be caused
by the Brush Agitators exerting too much pressure on the
bottom of the Seed Box. Adjust the Brush Agitators by
loosening the Bolts holding the Bearings inside the Seed
Box and raising the Bearings up to reduce the excessive
drag.
Figure 2-5: SSB4-6 Blade Agitator Rotation
5" Offset
Seeder
Frame Rear
Tube
Quick Attach Plate
REAR
FRONT
Frame Lug Frame Lug
Seeder CL
Quick Attach
Plate
C L
RH LH
3-PT Hitch
Direction
of T
ravel
Blade and 5-Strip Brush Agitators orientation is
important. Be sure to determine the direction of
shaft rotation before installation.
5-Strip Brushes will be destroyed if installed
backwards.
Shifter
Plate
Blade
Agitator
REAR
Shaft Rotation