OPERATION
7K555-2401
3-7
Front Meter Box Seed
Calibration Procedure
NOTE
The information listed in the Seed Charts is subject to
change without notice.
IMPORTANT
Planting rates are in pounds per acre. Rates are for 13
Tooth Driver. Double these values for optional 26
Tooth Driver Speed-Up Kit.
Brillion assumes no liability pertaining to Seeding Rates
achieved with this Seeder. Rates listed are general in
nature and should be used as starting points only. Seed
varieties and blends listed represent those calibrated
through in-house test meters.
Variations in actual rates may be realized due to
differences in seed lots. For accurate rates with seeds
being used, follow the calibration instructions listed on the
Seed Chart inside the Seed Box Cover or refer to this
manual.
listed in the
Seed Chart is subject to change without
notice.
Calibrate unlisted seeds as follows:
1. Remove the Outer Reduction Drive Chain between
the 17 Tooth and 19 Tooth Sprockets.
2. Raise machine.
3. Place a canvas or tarp under the Seeder to catch
seed.
4. Close Rear Seed Box openings if Seed Box contains
seed.
5. Turn 3/4 Calibration Hex Counterclockwise (CCW).
4FT Seeder:
Turn 239 Revolutions if you follow
Step6. Reference, the Seed Shaft rotates 1195
Revolutions per Acre Seeded with 13 Tooth Driver.
5FT Seeder:
Turn 191 Revolutions. Reference, the
Seed Shaft rotates 955 Revolutions per Acre Seeded
with 13 Tooth Driver.
6FT Seeder:
Turn 159 Revolutions. Reference, the
Seed Shaft rotates 795 Revolutions per Acre Seeded
with 13 Tooth Driver.
6. Weigh Seed in Lbs. Multiply by 5 for 13 Tooth Driver
and 10 for 26 Tooth Driver for approximate Planting
Rate in Lbs/Acre.
Figure 3-9: Chain Calibration
34T
13T
13T
19T
17T
Idler
Sprocket
Spring loaded
Idler Arm Assembly
Inner Seed Shaft
Drive Chain
Remove
Outer Reduction
Drive Chain
Front Roller
Drive Chain
23 Tooth Agitator
Sprocket Assembly
Rear Seed Box
26 Tooth
Sprocket Assembly
Front Seed Box
3/4,
Calibration Hex
Idler
Sprocket
Содержание Brillion SS4
Страница 14: ...1 10 7K555 2401 SAFETY INFORMATION TABLE OF CONTENTS Table provided for general use NOTES...
Страница 26: ...2 12 7K555 2401 ASSEMBLY TABLE OF CONTENTS Table provided for general use NOTES...
Страница 38: ...3 12 7K555 2401 OPERATION TABLE OF CONTENTS Table provided for general use NOTES...