23
Ardor
Gas Connection
Install the factory-supplied hose and regulator assembly as shown. Connect the end of the hose to the grill coupling using
an open wrench. Do not apply pipe sealant to the connection. Connect the regulator to the cylinder. Check for leaks using
soapy water solution. (See leak test procedure).
Note:
An enclosure for gas cylinder must be vented on the level of the cylinder valve and at floor level. The effectiveness of
the opening(s) for purposes of ventilation shall be determined with the LP gas supply cylinder in place. This shall be accom-
plished by one of the following:
Eeffective ventilation is provided by openings in its base and upper section, provided the total area of the openings in the
upper section is 1/100 of the base area of the compartment and that of the openings at the base is 1/50 of the base area
of the compartment.
Connect to appliance
Vents for adequate
ventilation
Cylinder
CE Approved
Propane Regulator
WARNING:
Do not store any spare cylin-
ders within the enclosure
Содержание 12113
