Land 4500 MKII Premier, Руководство по эксплуатации и обслуживанию

Страница: 57 / 139

Model 4500 Premier Dust and Opacity Monitor
57
System Data Register Table
NOTE
Certain registers are read-only. Any attempt to write to these registers will result in the
return of an error code.
Register # Parameter Data Description Range Write
Type Access
25 OPLR Float Optical Path Length Ratio 0.1 - 1.0 NO
26 (Previously PLCF)
49 Opacity Float Calculated opacity 0.00 - 1.00 NO
50
51 Optical Density Float Calculated optical 0.00 - 3.00 NO
52 density
53 Dust Density Float Calculated dust 0.0 - 10 000 NO
54 density
55 Average Optical Float Average optical density 0.0 - 3.00 NO
56 Density during gravimetric test
65 Cal Check OPz Float Cal check zero opacity 0.00 - 0.20 NO
66 value
67 Cal Check OP0 Float Cal check opacity value 0.00 - 0.20 NO
68
69 Cal Check Float Cal check span opacity 0.00 - 1.00 NO
70 Upscale value
85 Cal Timer 16-bit Calibration timer counter NO
(seconds)
86 Motor Timer 16-bit Motor timer counter (5mS) NO
87 Error Flags 32-bit Error flags* NO
88
104 System State 8-bit System status* YES
105 System Mode 8-bit System operating mode* NO
106 Cal Status 8-bit Calibration status* NO
For registers marked * see over page