Land 4500 MKII Premier, Руководство по эксплуатации и обслуживанию

Страница: 118 / 139

Model 4500 Premier Dust and Opacity Monitor
118
C4-5 Display Screens
DISPLAY (DISPLAY)
On selection of ‘Display’ on the menu spine press the
‘
ENTER' (
↵ ↵↵ ↵↵
) key. Two Display menus ‘Top Line’
and ‘Bottom Line’ can be scrolled through by pressing the
↑
or
↓
keys. The display is customised by
selecting the required display (see below) for both the top line and the bottom line of the display. To
return to the ‘Display’ menu and set the selection made press the EXIT key.
Setting Top Line Display
On selection of ‘Top Line’ press the
‘
ENTER' (
↵ ↵↵
↵↵
) key. Press the
←
or
→
keys to scroll through the
options available and then press the
‘
ENTER' (
↵ ↵↵ ↵↵
) key again to set the option selected. The selection
will appear on the top line of the display. To return to the ‘Top Line’ sub-menu press the EXIT key.
Options available are as follows:
Opacity (displays opacity value)
Optical Density (displays optical value)
Dust Density (displays dust density value)
Chan. 1 Average (displays average value of channel one)
Chan. 2 Average (displays average value of channel two)
Status ( displays system status faults)
Loop O/P 1 ( displays current loop output 1 reading in mA)
Loop O/P 2 ( displays current loop output 2 reading in mA)
Last Zero ( displays last zero calibration value)
Last Span (
displays last span calibration value)
Cal. Drift (displays drift between calibrations - range 0.1 to 1.0)
Version ( displays software version number)
Blank ( displays a blank line)
See next page for setting bottom line
↵ ↵↵
↵↵
↵ ↵↵ ↵↵
↵ ↵↵
↵↵
DISPLAY
Top line
↑↓
Bottom line
Optical Density*
Optical Density*