Section 7: Features & Benefits
RC(M)3715 & RCG(M)3715 Rotary Cutters 334-114M
1/26/21
58
Section 7: Features & Benefits
RC(M)3715 & RCG(M)3715 Models
Features
Benefits
Surpassed rugged industry standards
All Land Pride
Rotary Cutters
have been designed and tested and meet rigorous
voluntary testing procedures according to ISO 4254-13.
Factory assembled
Arrives for quick and easy set-up. Minimal time wasted setting or prepping the unit.
5 Year gearbox warranty
Shows confidence in gearbox integrity.
Rugged heavy built gearboxes
Capable of handling heavy cutting applications.
Gearbox seal protection
Gearbox bottom seal protection for longer bearing life.
2 Piece driveline shields
Driveline grease zerks are easier to access.
Low hitch weight on tractor tongue
Ideal for smaller hp tractors by reducing the amount of weight on the drawbar.
Narrow A-frame hitch
Allows for a tighter turning radius.
Adjustable park jack angle
Park jack can be adjusted to be perpendicular to the ground.
Adjustable driveline hanger
Serves as support rest for the driveline when the cutter is unhooked from the tractor.
Assist operator when attaching driveline to tractor power take-off shaft.
Input driveline: Cat. 6 CV
Driveline is matched just right for capacity of tractor. Constant velocity (CV) U-joint
allows for 80 degree turns without doing damage to the driveline.
Drivelines with slip-clutches:
Cat. 4 intermediate
Cat. 4 or Cat. 5 wings
Driveline is sized right for the intended cutting capacity.
Slip-clutches will slip under load to minimize twist damage to driveline profiles.
Grease zerks on end caps of driveline
Intermediate and wing driveline cross journals are easier to grease.
High blade tip speed
Allows clean cutting of material.
6" Blade overlap
Eliminates skipping during turns.
3/16" Round stump jumper
Standard thick stump jumper material keeps damage to a minimum.
Smooth top design
Reduces accumulation of debris and is easier and faster to clean.
Tops of decks are 100% welded
Makes center decks and wing decks stronger.
1/4" Sidewall thickness
Increased thickness reduces damage from objects being thrown into deck sidewalls.
Beveled skid shoes on wings
Reduces gouging the ground when turning.
LED signal lights
LED lights are bright, long lasting, and resist vibration, unlike incandescent lights.
Hinged wing sections
Allows
cutter
to follow terrain. Ideal for rough ground where hillsides, ditches, and
hollows can cause uneven cutting.
1" Solid hinge rods
Larger diameter hinge rod provides greater strength in the hinge area.
Wing transport lock pins
Transport lock pins will hold wings in folded position in the event of hydraulic loss.
Enclosed dual 1" leveling rods
C
utter
pulls equally on the rear axle while traveling over rough terrain.
5-Bolt hubs
5-Bolt hubs makes the wheel assembly more durable and longer lasting.
Drain holes in wheel rims
Allows water to drain from wheels mounted on folded-up wings.
Helps prevent paint deterioration and rusting to the wheel rims.
Spring cushioned center-axle
Protects unit from bumps and ground shock.
Replaceable individual wheel spindles
Spindles can be replaced when damaged without replacing entire axle assembly.
Wheel options
Laminated tires:
Eliminates flats.
Air-filled tires:
Give better cushion while transporting.
Foam-filled tires:
Give better cushion while transporting and can’t go flat.
LP Performance hitch option
Great for uneven terrain, reduces drawbar wear. Hitch pivots freely up and down and
pivots about the tractor drawbar.
Bar-tite hitch option
Ideal for extreme conditions. Clamps tight to drawbar eliminating drawbar wear.
Maintenance free tongue & axle pivots
Self lubricating journal bearings make for less maintenance.
Color coded hydraulic hose handles
Easy hose identification & sturdy handle to easily connect & disconnect from tractor.
4 lip purgeable metal backed wheel
hub seal
Seals make it harder for water & debris to enter the hub and grease to leave the hub.
Metal backing prevents sticks and twine from destroying the seal lips.
Greasable cast steel continuous hinge
Cast steel hinges make a strong connection & are easy to lubricate.
Galvanized decks on RCG models
Durable rust protection for harsh conditions.
