Land Pride RC4614, Руководство оператора

Страница: 61 / 66

Section 7: Features & Benefits
Table of Contents
7/30/20 RC4614 & RCM4614 Rotary Cutters 331-937M
57
Section 7: Features & Benefits
RC4614 & RCM4614 Models
Features Benefits
Surpassed rugged
industry standards All Land Pride Cutters have been designed and tested and meet rigorous voluntary
testing procedures according to ISO 4254-13.
Factory assembled Saves customer set-up time and money. Adjustments should always be made by dealer.
7 Year gearbox warranty* Shows confidence in gearbox integrity. Years 6 & 7 parts only.
250 hp divider gearbox
210 hp center & wing gearboxes
Rugged heavy-built gearboxes capable of handling heavy-cutting applications.
Gearbox seal protection Gearbox bottom seal protection for longer bearing life.
2 3/8" Output gearbox shaft
Large output shaft handles shock loads better.
Input driveline: Cat. 6 CV
Holds up to shock loads and harsh mowing conditions. Constant velocity (CV) U-joint
allows for 80 degree turns without doing damage to the driveline.
Easy greasable drivelines
Drivelines have access holes for greasing the U-joints and to grease the inner profiles.
4 Plate slip-clutch
Protects drivelines and gearboxes by slipping clutches rather than twisting the driveline
when impacts are encountered.
High blade tip speed
Allows clean cutting of material & even distribution. See Specifications for actual fmp.
6" Blade overlap Eliminates skipping during turns.
Good cutting capacity Can cut brushy areas with saplings up to 3".
13" Deck height Handles heavy cutting, which reduces balling-up of cut material under the deck.
Stump jumper / blade holder
Heavy round stump jumper for protecting the gearbox seal and gearbox output shaft.
Can hold up to tough conditions.
Spindle nut protected
Spindle nut and threads extending beyond the nut are guarded to protect against
damage from hitting solid objects.
10 gauge smooth deck top Reduces accumulation of debris and is easier and faster to clean.
1/4" side skirt Reduces debris piercing possibilities.
Self-leveling hitch
Reduces drawbar wear by keeping hitch level while going through ditches.
Hinged wing section
Allows cutter to follow terrain. Ideal for rough ground where hillsides, ditches, and
hollows can cause uneven cutting.
1" Solid hinge rod
Larger diameter hinge gives greater strength to
cutter
and hinge area.
Wing transport lock Holds transport wing in the folded-up position in case of hydraulic pressure loss.
Enclosed front to rear dual leveling
rods Dual leveling rods enable the
cutter
to pull equally on the rear axle during travel over
rough terrain. Many competitors only use one leveling rod.
5-Bolt hubs 5-Bolt hubs makes the wheel assembly more durable and longer lasting.
Drain holes in wheel rims
Allows water to drain from wheels mounted on the folded-up wing.
Helps prevent paint deterioration and rusting to the wheel rims.
Spring-cushioned center axle Protects unit from bumps and ground shock, cushions loads on drawbar.
Replaceable wheel spindles
Wheel spindles can be replaced when damaged without replacing the entire axle.
Simply remove one bolt to replace damaged spindle.
Rephasing lift cylinders Allows cutter to be leveled using hydraulic cylinders versus mechanical turnbuckles.
7/8" Leveling rods Large diameter leveling rods provide superior supporting strength over rough terrain.
LP Performance hitch option
Great for uneven terrain, reduces drawbar wear. Hitch pivots freely up and down and
pivots about the tractor drawbar.
Bar-tite hitch option Ideal for extreme conditions. Clamps tight to drawbar eliminating drawbar wear.
Roadway light kit option
Allows operator to transport on public roads safer when headlights are turned on
and/or when flasher lights are turned on.
Wheel options
Laminated tires: Eliminates flats.
Air-filled tires:
Give better cushion while transporting.
Foam-filled tires: Give better cushion while transporting & can’t go flat.
Deck rings (optional) Keeps blades from damaging the deck.