LANCOM 800+ – LANCOM DSL/I- 10+ – LANCOM DSL/I- 1611 Office
Chapter 2: Installation
24
EN
LEDs for LANCOM 800+ and LANCOM DSL/I-10+
Model example:
LANCOM DSL/I-10+
Power
This LED indicates that the device is operational. After the device has been
switched on, it will flash green for the duration of the self-test. After the self-
test, either an error is output by a flashing red light code or the device starts
and the LED remains lit green.
The power LED flashes red/green in alternation until a configuration
password has been specified. Without a configuration password, the
configuration data of the LANCOM is insecure. Under normal circum-
stances, you would assign a configuration password during the basic
configuration (see instructions in the following chapter). For informa-
tion about a later assignment of the configuration password see the
section ’Security settings’
→
page 66.
Online
The Online LED indicates the overall status of all WAN ports:
off
Device off
green
blinking
Self-test when powering up
green
constantly on
Device ready for use
red/
green
blinking alternately
Device insecure: configuration password not assigned
red
blinking
Time or connect-charge reached
off
No active connection
green
flashing
Establishing first connection
green
inverse flashing
Establishing further connection
green
constantly on
At least one connection established
red
constantly on
Error establishing the previous connection