LANCOM 800+ – LANCOM DSL/I- 10+ – LANCOM DSL/I- 1611 Office
Chapter 2: Installation
22
EN
LEDs for LANCOM DSL/I-1611 Office
LANCOM DSL/I-1611
Office
Power/Msg
This LED flashes once when powering-up your device. After the self-test either
an error is indicated by a flashing, or the device starts and the LED lights con-
stantly.
ISDN S0 Status
Indicates the status of the ISDN-S
0
connection:
ISDN Chan1
Status of the first logical ISDN B channel (in router as well as in CAPI opera-
tion):
LANCOM DSL I/1611 Office
ISDN
WAN
LAN
Security
off
Device off
red
flashing
once
Self-test when powering up
red
blinking
Constant flashing indicates time or charge limit exceeded.
Other flashing types indicate boot errors
red
Device is ready for use
off
not connected or no S
0
voltage (many ISDN connections dis-
able the S
0
voltage after a certain, inactive time)
green
blinking
initializing (establishing contact with the connection point)
green
ready for use
(S
0
bus activated, TEI existing and D channel protocol checked)
green
Power off
LED on, but Power-LED off: device in boot monitoring
off
no connection established
red blinking
incoming
call
green
blinking
outgoing call