LANCOM 800+ – LANCOM DSL/I- 10+ – LANCOM DSL/I- 1611 Office
Chapter 2: Installation
23
EN
ISDN Chan2
Status of the second logical ISDN B channel (meaning see ISDN Chan1)
ISDN-1+2
Indicates, whether the actual ISDN connection is a static or a dynamic channel
bundling.
WAN-Rx/Tx
This yellow LED indicates the data transfer via the WAN connection (via DSL
or cable modem).
WAN-Link
This green LED indicates that the Ethernet connection between LANCOM
router and the DSL resp. cable modem is operational.
WAN-Chan
This LED indicates the status of the WAN connection (via DSL or cable modem)
to the provider. The connection to the provider normally requires a login with
username and password. With time-dependent connecting rates arise
charges during this time. The meanings of the LED in detail:
LAN-Rx/Tx
Data packet from the device to the LAN or from the LAN sent to the device
LAN-Coll
Sending collision
LAN-Link
The connection to the LAN is established and ready for use
LAN-Fast
The LAN speed is 100 Mbps
Security-VPN
In VPN gateway operation, the LED provides the VPN status information:
red
physical line enabled, protocol negotiation ongoing
green
protocol negotiation (X.75, PPP etc) finished, physical
and logical connection operational
green/red
short red flashes
indication of received data packets
off
no bundled connection active
green
static or dynamic channel bundling connection active
off
no active connection
red
establishing connection (login)
green
Connection established (login successful)
off
no active VPN connection
green
VPN connection(s) active
red
establishing a VPN tunnel
