LANCOM 800+ – LANCOM DSL/I- 10+ – LANCOM DSL/I- 1611 Office
Chapter 2: Installation
29
EN
Configuration port
– you may optionally connect the router directly to
the serial port (RS-232, V.24) of a PC. Use the cable supplied for this pur-
pose. Connect the configuration port
with a free serial port of the PC.
Connect to power
– Connect socket
of the unit to a power supply
using the included power adapter.
Use the supplied power supply unit only! Using an unsuitable power
supply unit may cause damage or injury.
Operational?
– After a short device self-test the Power LED will be per-
manently lit. Green LAN LEDs indicate the LAN sockets that have function-
ing connections.
2.5
Software installation
This section covers the installation of the included system software LANtools
for Windows.
You may skip this section if you use your LANCOM router exclusively
with computers running operating systems other than Windows.
PC for configuration with
serial interface
ISDN NT
LAN
splitter
phone line
ADSL modem
Example configuration for
LANCOM DSL/I-10+