Lancia Voyager 2013, Руководство пользователя

Страница: 101 / 360

button and say “Select” or
“Delete”. Also, see the next two sec-
tions for an alternate way to “se-
lect” or “delete” a paired phone.
Select Another Mobile Phone
This feature allows you to select and
start using another phone paired with
the Uconnect™ Phone.
• Press the button to begin.
• After the “Ready” prompt and the
following beep, say “Setup Select
Phone” and follow the prompts.
• You can also press the button
at any time while the list is being
played, and then choose the phone
that you wish to select.
• The selected phone will be used for
the next phone call. If the selected
phone
is not available, the
Uconnect™ Phone will return to
using the highest priority phone
present in or near (approximately
within 9 m) the vehicle.
Delete Uconnect™ Phone Paired
Mobile Phones
• Press the button to begin.
• After the “Ready” prompt and the
following beep, say “Setup Phone
Pairing”.
• At the next prompt, say “Delete”
and follow the prompts.
• You can also press the button
at any time while the list is being
played, and then choose the phone
you wish to delete.
Things You Should Know
About Your Uconnect™
Phone
Uconnect™ Phone Tutorial
To hear a brief tutorial of the
Uconnect™ Phone features, press the
button and say “Uconnect™ Tuto-
rial”.
Voice Training
For users experiencing difficulty with
the Uconnect™ Phone recognizing
their voice commands or numbers,
the Uconnect™ Phone Voice Training
feature may be used. To enter this
training mode, follow one of the two
following procedures:
From outside the Uconnect™ Phone
mode (e.g., from radio mode)
• Press and hold the button for
five seconds until the session be-
gins, or,
• Press the button and say the
“Voice Training”, “System Train-
ing”, “Start Voice Training”com-
mand.
Repeat the words and phrases when
prompted by the Uconnect™ Phone.
For best results, the Voice Training
session should be completed when the
vehicle is parked with the engine run-
ning, all windows closed, and the
blower fan switched OFF.
This procedure may be repeated with
a new user. The system will adapt to
the last trained voice only.
To restore the Voice Command system
to factory default settings, enter the
Voice Training session via the above
procedure and follow the prompts.
95