Dropin 1522 Bargun
www.lancerbeverage.com
Page 11 of 25
Hoshizaki Lancer reserve the right to change specifications without notice.
Part No 68000014
Images are for illustration purposes only as product may vary.
No 030b-12 August 2013
6.
Mount the plate to the dropin with the screws provided.
7.
Mount the Bar Gun holster and attach the gun to the plate with the wing nuts and thumbscrews
provided.
8.
Connect the dropin to the bargun with insulated tubing jumpers with clamps as shown below.
Follow the connection label on the face of the drop in. The Insolex should be approximately
50mm longer than the jumper to assure good coverage after connection. A table on the
following page has recommended lengths.
9.
Attach the drain tube to the bottom of the Drop In and connect it to a suitable drain. Wrap the
drain nipple to prevent condensation.
