Revision:
1.0
Lampenwelt GmbH,
Seelbüde 13, D-36110 Schlitz
'
+49(0)6642/40699-0
6
+49(0)6642/40699-20
*
Freigabe:
13.12.2018, NBO
Seite
5
von
31
(GB) English
1. Safety instruc on
READ AND SAVE THESE INSTRUCTION.
WARNING: TO REDUCE THE RISH OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSON, OBSERVE THE FOLLOWING
1.
Proceed with cau on. Read all instruc ons before beginning the installa on.
2.
WARNING! This fan may be operated only with a 2-pole switch with a 3mm contact opening each.
3.
Only an authorized electrician should execute the installa on.
4.
The installa on height, i.e. the distance between the blades and the floor, should be at least 2.3 m.
5.
Make sure there are no obstacles in the rota on area.
6.
Make sure the fan is securely fastened at the ceiling.
7.
WARNING! Do not use a dimmer type switch to control the fan speed.
8.
WARNING! To prevent injuries, make sure the blades are not bent and that there are no objects within the area of rota on.
9.
WARNING! Due to European safety regula ons, if the flush mount op on is elected, the fan must not be re -installed u lizing the
downrod. If a empted, this may cause a serious injury. Please consult with local regula ons should you have any ques ons about
this important safety requirement.
10.
Keep electrical appliances out of reach of children or infirm persons. Do not let them use the appliances without supervision. these
condi ons of use by a competent person.
11.
Suitable for use indoors.
12.
Before disassembling light kit, make sure the power supply is disconnected from the main supply. Power supply can be on only a er
installa onis completed."
13.
The lampshade should not be removed from the light bulb when the power supply is on.
14.
Replacement of light bulb is only possible when the light kit has cooled down, and the power supply is disconnected from the main
supply.
15.
Make sure the lampshade is in the fixed posi on when opera ng the product.
16.
Always maintain the distance between the lamp and inflammable materials (curtains, wall, etc.), as indicated on the pictogram .
17.
IP20 The fan is designed for indoor use. It is not designed for installa on in a bathroom or any damp area. Pleas e ensure that the
lamp does notcome into contact with water."
18.
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental
capabili es or lack of experience and knowledge if they have been given s upervision or instruc on concerning use of the appliance in
a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance sha ll not
be made by children without supervision
19.
Children should be supervised to ensure that they do not play with the appliance.
2. Symbol descrip ons
Please find all valid symbols for this lamp on the product label as well as on the packaging
Protec on class I. This fan must be connected with its protec ve conductor (green-yellow wire) to the
protec ve earth-terminal.
Protec on class II. This fan is double isolated and must not be connected to a protec ve earth-terminal
AC - alterna ng current voltage
Hz
frequency (Hertz)
V
voltage in Volt
W
power in Watt
Minimum distance from the lamp to any lighted object in m. Please find the exact distance in ra ng label on
lamp.
Don’t use the lamp without the glass and if it’s broken it must be replaced!
Luminaire designed for use with self-shield tungsten halogen lamps only
Indoor use only
IP
Degree of protec on against external influences. Find the corresponding degree of protec on on ra ng label
This light fixture has been designed, produced and tested in compliance with strict European safety s tandards,
including DIN EN 60598 and others.
