LaMotte Smart 2, Руководство оператора

Страница: 39 / 54

n
EDIT USER TESTS
If a test other than the LaMotte programmed tests is performed regularly, a
calibration for it may be entered in one of the 10 User Tests. These tests are
originally named “
User Test 1 - 10
". It will be possible to rename the test,
select a wavelength, enter a new calibration, select the number of decimal
places used to display the results, and select the units. A User Test may be
added for a reagent system for which no precalibrated test exists. A calibration
of a LaMotte reagent system may also be entered. The calibration of a User
Test can be changed at any time.
The User Tests have the ability to handle 2 data points. The colorimeter will
determine the absorbance of the standards and calculate a response that will be
stored to determine the concentration of future samples of unknown
concentration. These standards should cover all the concentrations for the
range of the test being performed and be scanned beginning with the low
concentration and finishing with the high concentration (for more
information about this, see CALIBRATION CURVES, page 13). Prepare these
solutions prior to entering a new calibration.
NOTE: A calibration procedure must be performed before using any of the
User Tests.
The User Tests can be placed in any of the alterable sequences using
EDIT
SEQUENCES
.
To edit a User Test, start at the
EDITING MENU
. Scroll down to
Edit User
Test
.
EDITING MENU
* Edit Sequences
Edit User Test
Set Clock
Press the
Q /ENTER
button to select the
Edit User Test
.
EDITING MENU
* Edit User Test
Set Clock
Edit Logging
From the
EDIT USER TEST
menu, select the
User Test
to be entered or
changed. In this example, choose
105 User Test 01
. Use the
t
and
s
buttons to scroll to other User Tests if desired. Select the User Test by pressing the
Q /ENTER
button.
EDIT USER TEST
* 105 User Test01
106 User Test02
107 User Test03
108 User Test04
: : :
114 User Test10
SMART2 COLORIMETER 1.07 39