16
17
www.howdens.com
Built-in Single Split Cavity Oven
LAM3676
Instructions and Installation
9. Put your dish into the oven
and close the door.
10. If cooking function and
temperature values are
suitable, touch for two
seconds to start cooking.
Cooking will start and
will
appear on the display.
Oven will heat up to the
adjusted temperature. All
segments of the inner oven
temperature symbol will
turn on when the oven
reaches the set temperature.
11. When the cooking process
is completed touch key
again for two seconds to end
the cooking.
Cooking by setting the
cooking time;
You can make your oven switch
off automatically at the end of
cooking time by selecting the
temperature and function
specific to your meal and setting
the cooking time. Oven returns
to stand-by display after it is
powered on for the first time
and the current time is set. Only
the current time appears on
the display.
1. Remove the middle section
plate from the oven. Only after
the middle section plate is
removed the oven timer will
work in single large section
cooking setting.
2. Switch on the oven touching the
key for two seconds.
3. When the oven is switched on,
the first function peculiar to the
single large section cooking will
be displayed.
4. Touch to enter the display for
setting the operating function
number will flash on the display.
5. Touch
to set an operating
function.
6. If you want to change the
temperature, touch once
to reach the temperature
display. symbol will flash on
the display.
7. Touch
to set the desired
temperature. When the desired
value is reached, touch to
confirm temperature.
8. For Booster (Rapid Heating),
touch for approximately
3 seconds until appears on
the display. will appear
and the booster setting will
be activated.
When the booster setting is
made, the oven operates in
maximum power to reach the
set temperature. When the
temperature is reached will
disappear. Booster setting is
active for the functions during
which is displayed when is
touched for a long time. Booster
can only be activated for cooking
operations performed in the
single large section.
9. Touch
once for cooking time.
will flash the display.
10. Touch
to set the cooking
time and confirm the setting
by touching
. Once the time
is set, and
will remain on
the display.
11. Put your dish into the oven
and close the door.
12. If cooking function,
temperature and time
values are suitable, touch
for 2 seconds to start cooking.
Cooking will start and
will
appear on the display
Your oven will readily start
operating in the selected
function and will increase the
inner temperature to the set
temperature.
It maintains this temperature
until the end of the set cooking
time. Each grade of the inner
temperature symbol will be lit
as inner temperature reaches
to the set temperature.
Additional active heaters and
recommended tray position
appear in the Function display.
›› All segments of the inner oven
temperature symbol will turn
on when the oven reaches the
set temperature.
13. After the cooking is completed,
and will flash on the
display and an alarm signal
will sound.
14. To stop the alarm signal, just
touch any key. The oven will
switch off automatically.
15. If you want the oven to
continue operating, press
for 2 seconds. The oven
will continue cooking for an
indefinite period of time.
If you want to cancel the
setting after performing the
cooking setting by adjusting
the cooking time, you will need
to reset the cooking time. You
can also switch off the oven by
touching if you want.
