22
23
www.howdens.com
Built-in Single Split Cavity Oven
LAM3676
Instructions and Installation
ended by the user. Oven returns to
stand-by display after it is powered
on for the first time and the current
time is set. Only the current time
appears on the display.
1. Place the middle section plate
in its housing found between
the 3rd and 4th rack guides.
›› If the middle section plate
is not placed, the oven timer
will operate as a whole
single section.
2. Switch on the oven touching
the key for 2 seconds.
3. When the oven is switched
on, the first function special
to the top section cooking
will be displayed.
›› Each time you touch ,
the bottom section only, both
bottom and top sections and
the top section only will be
activated respectively.
4. Activate both sections by
touching twice.
5. Touch
to enter the display for
setting the operating function.
›› The relevant function number
will flash on the display.
6. Touch the
to select the
appropriate cooking function
amongst the ones adjusted
for both oven sections. For
example, to make grill in the
top and cook pastry in the
bottom section you can select
Grill & Fan supported function.
›› After the function is selected,
“
Temperature
” and “
Cooking
time
” can be adjusted
separately for each oven
section. and symbols of the
active cooking sections for this
settings will flash.
7. If you want to change the
temperature of top oven,
touch once to access the
temperature display of top
oven and will flash on
the temperature display of
the selected oven section.
8. Touch
to set the desired
temperature. When you reach
the desired value, confirm the
temperature by touching .
will rise steadily and symbol
of the active cooking section
will flash.
9. To change the temperature of
the bottom oven, activate the
bottom oven’s temperature
display touching . Bottom
oven’s symbol will flash.
10. Touch
to set the desired
cooking time and confirm by
touching .Once the cooking
time is set, will be displayed
continuously.
11. Touch
twice at short intervals
for the end of cooking time.
will flash on the display.
12. Touch
to set the end of
cooking time and confirm the
setting by touching .Once
the end of cooking time is set,
will be displayed.
13. Put your dish into the oven
and close the door.
14. If cooking function,
temperature, time and
end time values are suitable,
touch for 2 seconds to
start cooking.
›› will appear on the display.
Oven timer automatically
calculates the startup time
for cooking by deducting the
cooking time from the end of
cooking time you have set.
When the cooking startup time
comes, the selected cooking
function will be activated,
will disappear and the oven will
heat up to the set temperature.
It will maintain this temperature
until the end of the set cooking
time. Each grade of the inner
temperature symbol will be lit
as inner temperature reaches
to the set temperature.
Additional active heaters and
recommended tray position
appear in the Function display.
The oven lamp is lit during the
cooking process.
›› All segments of the inner oven
temperature symbol will turn on
when the oven reaches the set
temperature.
15. After the cooking is completed,
and will flash on the
display and an alarm will sound.
16. To stop the alarm, just touch
any key. The oven will switch off
automatically.
17. If you want the oven to
continue operating, press
for 2 seconds. The oven
will continue cooking for an
indefinite period of time.
›› If you want to cancel the
programme after performing
the cooking setting by adjusting
the cooking time, you will need
to reset the cooking time. You
can also switch off the oven by
touching if you want.
Using the top and bottom sections
of the oven simultaneously.
Manual cooking by selecting
temperature and operating
function.
During manual operation, the
oven will operate regardless of
the cooking time after the function
and temperature selection is
made. The oven will not switch off
automatically at the end of the
cooking time. Cooking should be
