48
49
www.howdens.com
Built-in Single Split Cavity Oven
LAM3676
Instructions and Installation
Technical information
General
Voltage / frequency
220-240 V ~ 50 Hz
Total power consumption
3500 W
Fuse
16A
Oven / grill
External dimensions
(height / width / depth)
595mm / 594mm / 567mm
Installation dimensions
(height / width / depth)
590-600mm / 560 mm / min. 550mm
Main oven
Multi-function oven
Inner lamp type (A)
240 V / 15-25 W / E14 SES / T 300°C
Inner lamp type (B)
25 W, G9, 300°C
Mains cable
H05W-F 1.5mm
2
3 Core (1.4m)
Basics:
Information on the energy label of electrical ovens is given in
accordance with the EN 60350-1 / IEC 60350-1 standard. Those values
are determined under standard load with bottom-top heater or fan
assisted heating (if any) functions.
Energy efficiency class is determined in accordance with the following
prioritization depending on whether the relevant functions exist on
the product or not: 1-Cooking with eco-fan, 2-Turbo slow cooking,
3-Turbo cooking, 4-Fan assisted bottom / top heating, 5-Top and
bottom heating.
Technical specifications may be changed without prior notice
to improve the quality of the product.
Figures in this manual are schematic and may not exactly match
your product.
Values stated on the product labels or in the documentation
accompanying it are obtained in laboratory conditions in
accordance with relevant standards. Depending on operational
and environmental conditions of the product, these values
may vary.
Troubleshooting guide
Symptoms
Possible cause
Solutions
Oven emits steam
when it is in use.
• Food is being cooked
with a high water content.
It is normal that steam
escapes from food during
cooking. This is not a fault.
Product emits metal
noises while heating
and cooling.
• When the oven cavity heats
up or cools down parts will
expand and contract.
This is quite normal and
the oven is designed to
accommodate such
movement (this is not a fault).
Product does not
operate.
• The mains fuse is maybe
defective or has tripped.
• Product is not
connected properly.
Check all power
connections.
Check fuses in the fuse
box. If necessary, replace
or reset them.
Oven light does
not work.
• Oven bulb is defective
Replace oven bulb.
• Power is cut
Check if there is power.
Check the fuses in the fuse
box. If necessary, replace or
reset the fuses.
Oven does not heat.
• Function and / or
temperature are not set.
• The timer is not adjusted
correctly.
Reset the oven timer
• Power is cut
Check if there is power.
Check the fuses in the fuse
box. If necessary, replace or
reset the fuses.
If you cannot eliminate the problem after following the instructions
in this section, consult your depot or the Authorised Service Agent.
Never try to repair a non-functional product yourself.
12. Troubleshooting
11. Technical specifications