20
21
www.howdens.com
Built-in Single Split Cavity Oven
LAM3676
Instructions and Installation
7. If you want to change the
temperature, touch once
to reach the temperature
display symbol will flash
on the display.
8. Touch
to set the desired
temperature, When the desired
value is reached, touch to
confirm the temperature.
9. Touch
once for cooking time.
will flash on the display.
10. Touch the
to set the
desired cooking time and
confirm the . Once the
cooking time is set,
will
be displayed continuously.
11. Put your dish into the oven
and close the door.
12. If cooking function,
temperature and time values
are suitable, touch for
2 seconds to start cooking.
Cooking will start and
will
appear on the display.
›› Your oven will readily start
operating in the selected
function and will increase the
inner temperature to the set
temperature. It will maintain this
temperature until the end of the
set cooking time. Each grade of
the inner temperature symbol
will be lit as inner temperature
reaches to the set temperature.
Additional active heaters and
recommended tray position
appear in the Function display.
All segments of the inner oven
temperature symbol will turn
on when the oven reaches the
set temperature.
13. After the cooking is completed,
and will flash on the
display and an alarm signal
will be heard.
14. To stop the alarm signal, just
touch any key. The oven will
switch off automatically.
15. lf you want the oven to
continue operating, press
for 2 seconds. The oven
will continue cooking for an
indefinite period of time.
›› If you want to cancel the setting
after performing the cooking
setting by adjusting the cooking
time you will need to reset the
cooking time. You can also
switch off the oven by touching
if you want. Setting the end
of cooking time to a later time;
You can ensure that the oven
runs and turns off automatically
by setting temperature and
operating function specific to
your meal, the cooking time
and end of cooking to a later
time, manually controlling
without setting the cooking
time. Oven returns to stand-by
display after it is powered on
for the first time and the current
time is set. Only the current time
appears on the display.
1. Place the middle section plate
in its housing found between
the 3rd and 4th rack guides.
If the middle section plate
is not placed, the oven timer
will operate as a whole
single section.
2. Switch on the oven touching
the key for 2 seconds.
3. When the oven is switched on,
the first function special to the
top section cooking will be
displayed.
›› Touch once to activate the
bottom section of oven. will
appear next to the active oven
section. Temperature setting
and cooking process initiation
steps for both bottom and
top oven sections will iterate in
the same way. (In the images,
the bottom oven is shown
as selected).
›› Each time you touch the
bottom section only, both
bottom and top sections and
the top section only will be
activated respectively.
5. Touch to enter the display for
setting the operating function.
The relevant function number
will flash on the display.
6. Touch
to set the desired
operating function.
7. If you want to change the
temperature, touch once
to reach the temperature
display symbol will flash on
the display.
8. Touch
to set the desired
temperature. When the desired
value is reached, touch to
confirm temperature.
9. Touch once for cooking time.
will flash on the display.
