Lambrecht Ser[LOG], Руководство оператора

Страница: 94 / 129

LAMBRECHT meteo GmbH Ser[LOG] Manual Page 94 of 129
12.2 Register “Password guidelines“
In the factory default setting, only a primitive password is required.
For higher requirements Lambrecht recommends changing the settings as suggested here. When en-
tering the password, the system then checks for the structure defined here.
Attention! Change the administrator password immediately according to these settings.
saves the changes in this register
ends the function and closes the mask
Attention!
The following two registers describe the activation of a protection mechanism that merges Ser[LOG]
and the application software (Ser[LOG]_Cmd and MeteoWare_CS_4) into one unit. Only programs and
loggers in which the code for the fusion of software and hardware is stored can then communicate with
each other. The advantage is that this code is entered in the programs only once by the administrator
and is subsequently no longer visible or retrievable. Even legitimate users of the software cannot see or
change it. It is not transferable from one computer to another (copy all files of the software), because it
checks computer internal identifiers and destroys itself if necessary. On each PC on which
Ser[LOG]_Cmd or MeteoWare_CS_4 is to be used; the administrator must re-enter the code.
At the same time, access to the logger control panel is blocked and can only be unlocked by entering a
12-digit numeric code.
This form of access protection to the data loggers is particularly advantageous for measuring networks,
as it allows all loggers to be protected without having to assign individual passwords, which are usually