Lambrecht Ser[LOG], Руководство оператора

Страница: 42 / 129

LAMBRECHT meteo GmbH Ser[LOG] Manual Page 42 of 129
Select the "LAMBRECHT Service Port".
5.3.1.2 Configuration via USB Bluetooth stick
Note: At present, the Ser[LOG] only supports Bluetooth sticks with a Bluetooth chip from CSR.
Plug a suitable Bluetooth stick into the USB-HOST connector of the Ser[LOG] and activate the Bluetooth
connection by navigating to the menu item "Bluetooth ON" and pressing the rotary pushbutton.
For the connection, the Bluetooth interface must be activated on the PC and the Ser[LOG], which reports
with its station name, must be connected to the PC. The PC asks for the identification of the device to
be connected. The identification code is "0000".
After successful coupling, two serial COM interfaces are available on the PC, one "incoming" and one
"outgoing" (see Bluetooth settings "COM ports"). In the Ser[LOG]-Commander select the COM port of
the "Outgoing" COM interface in the "Interface" selection box of the "PC Settings".
5.3.1.3 Create new configuration
To configure the Ser[LOG], the station number of the logger must be known. In the factory setting, each
Ser[LOG] has the station number: 0001.
At the beginning of the configuration, it is recommended to load the current configuration from the data
logger first. This allows simultaneous testing of the communication with the Ser[LOG] to determine
whether communication with the Ser[LOG] is working.
To do this, select the station with the designation "---?? --- "off. This definition has the "universal" station
number "0000". With this setting you can retrieve all stations, no matter with which station number they
are configured.