Lucid Series RF Signal Generator
Portable User Manual
Rev. 1.1
5
Table 5.3 Phase Noise and Harmonics Specification .................................................................................. 43
Table 5.4 Modulation Specification ............................................................................................................ 43
Table 5.5 Inputs Specification ..................................................................................................................... 45
Table 5.6 Outputs Specification .................................................................................................................. 45
Table 5.7 General Specification .................................................................................................................. 46
D
Document Revision History
Table Document Revision History
Revision Date
Description
Author
1.1
26-Mar-21
x
1.2 Software Support, page 10
– New.
x
Removed sections “Lucid Software Requirements”,
“Installation, “PC Control Software”,
‘Troubleshooting”, and “FPGA Firmware Update” that
are included in the new “Lucid Control Panel User
Manual”.
x
Removed section SCPI Programming that is included in
the new “Lucid Programming Manual”.
x
Table 5.4 Modulation Specification, page 43
– Changed
Sweep Dwell Time from “10 μs to 1,000 s” to “100 μs
to 1,000 s”.
Jakob Apelblat
1.0
6-Aug-20
x
Original release supporting Lucid SW Rev. 1.2.0 and SPI
& SCPI Commands List Summary Rev. 1.14.
Jakob Apelblat
