Lucid Series RF Signal Generator
Portable User Manual
Rev. 1.1
16
3
3
Portable GUI
3.1
CW Tab
The CW (Carrier Wave) tab becomes available on the front panel display after power-up of the
generator. From here the user can set the basic output parameters of the generator.
Figure 3.1 CW & Modulation Tab
x
Status
Bar
– The bar at the bottom of the screen displays a summary of the system status and is
shown in all tabs.
Frequency
– The CW frequency.
Power
– The power (amplitude) of the output signal (in dBm).
Phase
–
The phase offset of the signal (0 – 360 deg.).
Reference:
Internal
– The modulation source is the generator.
External
– The modulation source is an external connected source.
Mode
– Shows which modulation is on (press Mode ON/Off in the respective modulation
window).
CW
– Carrier wave (default)
AM,ON
– Amplitude modulation
FM, ON
– Frequency modulation
PM, ON
– Phase modulation
PULSE ON
– Pulse modulation
PATT,ON
– Pattern modulation
FRSW,ON
– Frequency sweep mode is selected.
PRSW,ON
– Power sweep mode is selected.
LIST,ON
– List mode is selected.
Run Mode:
