Lucid Series RF Signal Generator
Portable User Manual
Rev. 1.1
23
x
# Steps
– sets the number of steps in one sweep (including
Start
and
Stop
). The value displayed in
Step Size
changes accordingly.
3
3.3.2
Power Sweep
Select the Sweep tab, and then click the PWR button. You can now define a signal that sweeps from one
amplitude to the next, maintaining the same frequency.
Figure 3.8 Power Sweep
x
Start Pwr
– start power sets the start sweep amplitude (in dBm).
x
Stop Pwr
– stop power sets the stop sweep amplitude (in dBm).
x
Dwell Time
– sets the sweep dwell time that is the duration of the entire sweep.
x
Step Size
– sets the size of each step (in dBm) in the sweep. The value displayed in
# Steps
changes
accordingly.
x
Step Time
– sets the step dwell time. The value displayed in
Dwell Time
changes accordingly.
x
Direction
– sets the sweeping direction:
UPDOWN
– to sweep from start frequency to stop frequency; then, from stop frequency to
start frequency .
NORMAL
– to sweep from start frequency to stop frequency.
x
# Steps
– sets the number of steps in one sweep (including
Start
and
Stop
). The value displayed in
Step Size
changes accordingly.
