Lucid Series RF Signal Generator
Portable User Manual
Rev. 1.1
19
Figure 3.4 PM – Phase Modulation
x
Frequency
– Set the modulation Frequency (Hz).
x
Deviation
– Set the phase deviation degree of the modulation frequency.
x
Push the
Mod On/Off
button on the device front panel to start the modulation and then
RF On/Off
button to output the signal.
3
3.2.4
Pulse Definition
Select on the device display the Modulation tab, and then click the PULSE button to show the pulse
parameters.
Note
The
PULSE
button is only available if the device has the Pulse option installed.
Figure 3.5 Pulse Definition
x
Width
– Set the pulse modulation width. Use the push buttons on the front panel to select units.
