Lucid Series RF Signal Generator
Portable User Manual
Rev. 1.1
10
1
1.2
Software Support
The
Lucid Control Panel
is a software package that comes on a CD supplied with the device. It enables
full control and programming of your Tabor Electronics Lucid series RF analog signal generators via a
user-friendly graphical user interface. The
TE Update Tool
is a utility for updating the Lucid device FPGA.
The
Lucid Programming Manual
lists and describes the set of SCPI-compatible (Standard Commands for
Programmable Instruments) remote commands used to operate the Lucid devices.
The programs and the user manuals can be downloaded from the Tabor Electronics website at
http://www.taborelec.com/downloads
.
1.3
Document Conventions
Convention
Description
Example
Bold Writing
Indicates an item/message in the
User Interface.
Click the
On
button.
<Angled and Bolded
Brackets>
Indicates a physical key on the
keyboard.
Press <Ctrl>+<B>.
Caution!
A Caution indicates instructions, which, if not followed, may result in damage to the
equipment or to the loss of data.
Note
A Note provides additional
information
to help obtain optimal equipment performance.
Idea
An Idea provides an alternate procedure to obtain the same results.
1.4
Safety
To avoid Electrical Shock, fire or personal injury:
x
Use only the proper power cord and certified for the country of use.
x
This product is grounded through the grounding conductor of the power cord. To avoid electrical
shock, the grounding conductor must be connected to the ground. Before connecting to the power
input or output, ensure that the product is properly grounded.
x
Do not operate this product with removed covers or panels.
x
Observe all the ratings and markings on the product. Search this manual for further rating
information, before connecting to it. Do not apply potential that is higher than the maximum
rating.
