manualshive.com logo in svg

Lake Shore Model 421, Руководство пользователя

Поделиться
Скачать
Lake Shore Model 421 Скачать руководство пользователя страница 25

Lake Shore Model 421 Gaussmeter User’s Manual 

 

 

Operation 

3-7 

3.8 RELATIVE 

The relative function lets the user see small variations in larger fields. The setpoint (or center) of the 
relative reading is set when pressing the 

Relative 

key. This captures the current reading and effectively 

nulls the present field. 

 

  +1.420  kG DC 
  Relative On

 

 

Once the 

Relative

 key is pressed, the 

Relative

 

On

 message is briefly shown on the lower line of the 

display. This is followed with the selected setpoint (SP) being displayed on the lower line and the 
current plus or minus deviation from that setpoint on the upper line. A small delta (

°

) is also displayed 

to signify the relative display. 

 

  +0.000  kG DC    ° 
  +1.420  kG SP

 

 

The relative feature also interacts with other features. When Relative and Max Hold functions are used 
at the same time, the relative reading is still in the top display with proper annunciators, but the bottom 
display shows the relative maximum instead of the relative setpoint. 

 

  +0.002  kG DC    ° 
  +0.010  kG MAX

 

 

Pressing 

Max Hold

 again turns off the maximum hold function, returning the relative setpoint to the 

display. Pressing the 

Relative

 key turns off the relative function. The 

Relative

 

Off

 message is briefly 

displayed. 

3.9 ALARM 

AND 

RELAY 

The alarm feature can be easily configured to perform several different tasks including error detection 
and limit testing. The most powerful application is manual magnet testing and sorting. A display 
annunciator, message display, beeper, and relay are all available to indicate an active alarm state. This 
section describes all of the parameters available for the alarm feature then gives examples to illustrate 
operation under different conditions. 

 

When the alarm feature is on the alarm annunciator (

ª

) will appear in the top display. If there is an 

alarm condition the annunciator will flash to indicate the alarm is active. If there is not an alarm 
condition the annunciator will remain steady to indicate the alarm is in its normal state. Beeper and 
relay operation follow the alarm condition in a similar way when they are in use. The alarm function is 
non-latching so no action is required to reset the alarm. The alarm resets automatically when the alarm 
condition is no longer present. 

 

To turn the alarm feature on press the 

Alarm

 key and the following display will appear. 

 

  Select With  °® 
  Alarm   ¡On   Off

 

 

Use the 

s

 or 

t

 keys to select between Alarm On and Off and press 

Enter

 to accept the new setting. 

 

Содержание Model 421





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды